Platte River Navigation
Nebraskans familiar with the Platte River would probably never imagine it as a source of transportation. Today's flows, however, are only about 10 percent of its past volume. With that much more water, one might think the Platte was navigable in historic times.
Among the earliest first hand accounts of navigating the Platte was that of E. Willard Smith. After wintering in the Rockies, he embarked on a journey to St. Louis on April 26, 1840, in the company of South Platte fur trader Andrew Sublette. From Smith's diary we learn: "We started in a mackinaw boat . . . thirty-six feet long and eight feet wide. We had seven hundred buffalo robes on board, and four hundred buffalo tongues. . . . The water was very shallow and we proceeded with great difficulty, getting on sand bars every few minutes. We were obliged to wade and push the boat along most of the way for about three hundred miles, which took us forty-nine days." Other fur traders also tried with limited success to bring furs down the Platte.
In 1860 C. M. Clark, traveling the Overland Trail to the gold fields of Colorado, noted navigators, probably miners, on the river: "Their progress was often interrupted by striking the sand bars, when their craft would swing round and stop, then the boatmen would have to get out and drag it over, which was effected, after much delay, by tugging at the bowline and pushing at the stern. The sand bars met with are very wide and numerous in many places, and a great effort was required to cross them; and the majority who attempted to navigate the Platte at this season, after proceeding down a hundred miles or so, left their boats and took the road."
As far as we know, subsequent travelers also took to the road. The Platte was truly the river which evoked its name-"flatwater"-a mile wide and an inch deep. Its navigability today is present only through the siphoning-off of its water to leave a dry bed for the steel and concrete of our modern surface transportation.
Return to Timeline Index